The Attic Art Yard wall restoration ; Scraping off the old plaster/lime

Chiseling the walls to get the dirt and old plaster off

Restoring the walls at "The Attic Art Yard" has been an extensive and challenging process, starting with the outdoor walls and moving inside. The project began with cleaning the outdoor surfaces, which were heavily coated with grime and layers of old plaster.

 High-pressure washers and scrub brushes helped remove the bulk of the dirt, but scraping off the old plaster required careful work with scrapers and chisels to avoid damaging the underlying structure. Once the exterior walls were tackled, I shifted focus to the indoor spaces. Similar to the outdoor walls, the indoor surfaces needed thorough cleaning. 

Chemical removers and scrubbing tools were used to strip away old paint and dust. Removing the old plaster involved a lot of chiseling and scrubbing to ensure a clean surface for new treatments. After the cleaning, I had to address any damage by filling cracks and holes and then sanding the walls to achieve a smooth, even surface. The next stage involved applying treatments, which was both time-consuming and labor-intensive.

 Multiple layers of new plaster were applied, with each layer needing ample time to dry and cure. Additionally, various sealants and primers were used to prepare the walls for the final finishes. This process was complicated by health issues from the dust and fumes generated by the materials. Proper ventilation and protective gear were essential to manage these concerns and I used only the ones i could afford (which wasnt enough) . Overall, the restoration of "The Attic Art Yard" required considerable effort and patience. Each step, from cleaning and chiseling to applying treatments, presented its own set of challenges. Despite the difficulties encountered along the way, the project made significant progress towards revitalizing the space.

 

I did try to seek help from whoever was available at home